Feuling Race Series Tapped Set – STD Travel, STD OD

Feuling Race Series Tapped Set – STD Travel, STD OD

Feuling Race Series hydraulic lifters for M8 engines with standard 0.200" lift and standard diameter. Relief is milled in the lower part to avoid contact with the camshaft front exhaust lobe on camshafts with smaller base circles than standard.

These full-length hydraulic lifters are made of cold-forged steel and designed to handle larger lift camshafts and higher valve lift pressures with a slower leak rate. They ensure proper oil flow to the cylinder head, improve valve-train stability, reduce valve float and maximize valve lift.

Race Series lifters are especially recommended for M8 engines with higher lift camshafts and higher valve lift pressures. They help reduce valve-train separation, resulting in a quieter, better performing engine.

Full hydraulic lifter with standard 0.200" lift

Made of cold forged steel

Precision needle roller bearing with high-chrome steel shaft

High flow check valve for better response at high revs

Compatible with Feuling OE+, HP+ and Race Series as well as factory oil pumps

Suitable for both street and track engines

Sold in sets of 4

Made in the USA

Note: M8 engines must check clearance on front-exhaust lifters against camshaft flange. Feuling recommends manually pumping up each lifter during installation to remove air and ensure fully pumped lifters.

Suitable for:

Harley-Davidson M8 Engines 2017–2025